Set of (3) Aluminum Trick Truck X Mini Carriages for the Rostock MAX 3D printers by SeeMeCNC.
A further refined version of our already awesome and popular "Trick Trucks"
Uses dual bearing MINI V-wheels from Open Builds. Two bearings in each wheel instead of stock single bearing for increased precision and stability.
- Now with MINI V wheels for even greater stabilty and reduced weight
- Very lightweight and compact
- Improved and simplyfied belt clamp design, clamp screw & washer included.
- Mounting boss for SeeMeCNC 3/8" ball bar-bells, includes bar-bells & screws.
- Includes end-stop trigger screw, compatible with V3 and older machines.
- 3 wheels in triangle pattern is a more stable design
- Arm mounting point is within the bearing triangle for increased strength stability
- Silky smooth, easy movement
- Only one tension adjustment via eccentric cam
- Easy to get just the right action
- Adjustment locks firmly in place and does not loosen.
- No plate on outside of machine extrusion enables easier fitting of machine enclosure
Assembly video http://youtu.be/jIWjqIAiM7Q note: video shows using (36) shim washers, you can use (27) if 1 under screw head is omitted.
Install video http://youtu.be/iGB8jksgR-c
Note: the above videos show our original Trick Trucks, but assembly and install is basically the same.
V-wheel and hardware pack includes,
- (9) Delrin MINI V Wheel - sku# 165
- (18) Mini Ball Bearing 105zz 5x10x4 - sku# 800
- (6) Stand-off spacers - 1/4" long - sku# 15
- (3) Eccentric spacers - 1/4" long -sku# 70
- (27) Precision shim washers - 5x10x1 -sku# 5
- (27) MINI Precision shim washers - 5x8x1 -sku# 170
- (9) Low Profile Axel screws - M5 x 30 mm -sku# 125
- (9) M5 lock nuts -sku# 10
or you can buy them from Open Builds parts store http://www.openbuildspartstore.com
- Item #: TTRUCK-XMINI